Technical Manual MiniMEP Data Loggers
page 2
Contents
page
General Description ............................................. 2
Operating ............................................................. 3
Programming Access Authorization,
Reset Error Messages, Buzzer/Relay Test,
Error Messages / -codes
Functional Description ......................................... 4
Programming designations .............................. 4
Parameter listing (2)434A, (2)534A .................... 5
Parameter listing (2)404S, (2)424A, (2)524A ..... 6
Connection, Versions 4xx .................................... 7
Connection, Versions 5xx .................................... 9
Dimensons ........................................................... 10
Processing of Data, PC connection,
Unlock of recording system ................................. 11
Installation ........................................................... 12
Cable lenghts ................................................... 12
Connection and Safety Notes
....................... 12
Accu operation
............................................... 12
Start-up ................................................................ 12
Technical Data / Accessories .............................. 13
CE-Statement of Conformity ............................... 14
Appendix: Drilling template, calibration and start-up report
General Description
The MiniMEP data logger series is developed for paperless
recording of temperature resp. humidity values and to store them
for a long period of time.
The unit measures temperatures by high accurate platinium
sensors and stores the values in a non-volatile memory for
unlimited time.
Without additional utilities, the user is able to recall every
recorded value with its date, time and position designation.
If this memory is full, the oldest recorded values will be erased to
get space for the newest values.
The units are available in 2 different housings and memory sizes
(see overview below).
A special version (MiniMEP 434 A/534 A) can record 2 temperature
values and the values of two 4...20 mA-humidity transmitters.
Type-
Housing
Inputs
Recording
Digital
Alarm Limits
LC-
Input for
Memory Cap- Supply
Overview
Range
inputs
Alarm relays Display additional- acity with 15
Accu
min. interval
MiniMEP 404 S
wall mounting
4x temp.
-110/+600°C --
--
X
--
366 days
230V
MiniMEP 2404 S
wall mounting
4x temp.
-110/+600°C --
--
X
--
366 days
115V
MiniMEP 424 A
wall mounting
4x temp.
-110/+600°C 3x 230V
1x SPDT
X
X
appr. 6 years
230V
MiniMEP 2424 A
wall mounting
4x temp.
-110/+600°C 3x 115V
1x SPDT
X
X
appr. 6 years
115V
MiniMEP 424/12V
wall mounting
4x temp.
-110/+600°C 3x 12VDC
1x SPDT
X
X
appr. 6 years
12V
MiniMEP 434 A
wall mounting
2x temp.
-110/+600°C 3x 230V
1x SPDT
X
X
appr. 6 years
230V
2x humidity 0/100% r.F.
MiniMEP 2434 A
wall mounting
2x temp.
-110/+600°C 3x 115V
1x SPDT
X
X
appr. 6 years
115V
2x humidity 0/100% r.F.
MiniMEP 524 A
panel mounting 4x temp.
-110/+600°C 3x 230V
1x SPDT
X
X
appr. 6 years
230V
MiniMEP 2524 A
panel mounting 4x temp.
-110/+600°C 3x 115V
1x SPDT
X
X
appr. 6 years
115V
MiniMEP 534 A
panel mounting 2x temp.
-110/+600°C 3x 230V
1x SPDT
X
X
appr. 6 years
230V
2x humidity 0/100% r.F.
MiniMEP 2534 A
panel mounting 2x temp.
-110/+600°C 3x 115V
1x SPDT
X
X
appr. 6 years
115V
2x humidity 0/100% r.F.
Note
The temperature recording system MiniMEP corresponds to
the requirements of the european standard EN 12830.
Please note that according to the standard EN 13486, the
end-user is bound to a continuous check of the units for
operation and accuracy.
