98
www.elpro.com.au
245U-E Wireless Ethernet Modem User Manual
Rev Version 2.24
Figure 91 Statistics
Wireless Statistics
On the Statistics webpage, Wireless Statistics is the main area for additional diagnostics statistics. The list of
statistics produced is dynamic and may vary depending on the model and configuration (2.4 GHz, 5 GHz or
900 MHz, and client or access point).
Access Point
Beacon Miss Count
Number of beacons unable to be sent (100-msec intervals) due to interference
or CCA.
Beacon Missed Reset
Count
After 15 consecutive beacon misses (1.5 seconds), this count will increment
by 1. This will indicate high interference because the AP is holding off sending
beacons, and utilization will increase.
TX Queue stopped
because full
Message buffer (Ethernet frames) in radio queue. If the radio cannot transmit
due to high noise, this queue increments. When the buffer is full, all new
messages are dropped. Buffer size is 150 messages.
Client
Beacon Missed
Interrupts
The number of beacons (100 msec) the client has missed from the access
point.
