122
www.elpro.com.au
245U-E Wireless Ethernet Modem User Manual
Rev Version 2.24
Figure 101 iperf –s Command
3. On the client PC, open up a command prompt and change the directory to jperf-2.0.2\bin, as you
did above for the server. This time enter the iperf command to start the client communication to the
server:
“iperf –c <IP address of Server PC> -w 65535”
See Figure 102.
Figure 102 iperf –c Command
This will run a test over the Wi-Fi link to the server PC and report back results as seen in Figure 103.
These results show the bandwidth (throughput) of the test as 16.2 Mbits/sec.
Figure 103 Bandwidth
4. Using the theoretical throughput calculations in the following table you can compare the results with