www.elpro.com.au
245U-E Wireless Ethernet Modem User Manual
109
Rev Version 2.24
In the Network A PC, a routing rule needs to be set. This will allow Network A and B to have access to each
other. This is entered under the cmd prompt, as follows:
Route ADD 192.168.2.0 MASK 255.255.255.0 192.168.0.191
This says access everything on network B (192.168.2.0) with the mask of 255.255.255.0 on Network A via
the Ethernet IP interface 192.168.0.191.
IP address 192.168.2.0 will allow everything on this network to be shared by the router. When adding a
routing table you will need to enter this address. Once entered, the router will determine whether to pass
information over the router if it is addressed to do so or not. For added security, MAC address filtering
could be added, as discussed earlier in “3.19 Filtering.”
