USB interface
This unit have a USB jack, when no disc in the player, you can insert a USB DISC or a Mp3 Player with USB
Interface to play the Mp3 music or and JPEG files. All the function is the same to play a disc.
Press the SOURCE key on the remote control until you switched into USB work mode
Connection terminals for this DVD receiver
are found on the rear panel. Read carefully
and follow the manufacturers' instructions
of any video and audio device being
connected to this unit.
Do not connect the power until all connections
have been properly completed.
Red terminal (marked R) is for connecting the
right channel. The white terminal (marked L)
is for connecting the left channel. The yellow
terminal is for video connection. Make sure
all connections are securely made. Improper
connections may cause noise, poor perfor-
mance, or cause damage to the equipment.
Do not tie the AV cord with any other cords,
such as the power cord or speaker wires, as
it may result in poor picture and/or sound
quality.
CONNECTING
DEVICES
-8-
-9-
Y
Pb/Cb
Pr/Cr
ANTENNA
FM
SPEAKERS IMPEDANCE
CVBS
Cb/Pb
Cr/Pr
S-VIDEO
COAXIAL
R
L
Y
100-240V~
50/60H
Z
AUDIO
VIDEO OUTPUT
ANTENNA
ATV/DTV ATN
AMPLIFIER
USB interface
SCART
www.elonex.com
www.elonex.com
CD RIPPING FUNCTION
During CD playback, you can encode music file from CD to MP3 file and record it in USB player.
1. Insert CD disc and connect USB Memory Device to USB Port of DVD player. The USB Memory Device may
need to be formatted in advance.
2. Select and playback desired CD track you want to encode, and then, press “SUBTITLE” button in remote
controller to start CD RIPPING function. Information will be shown in TV accordingly and selected track song
is recorded as MP3 FILE in USB Memory Device.
3. Every time you press “SUBTITLE” button, only current track file is recorded as MP3 FILE in USB Memory
Device. To record other music file, select and play desired CD track again, and press “SUBTITLE” button.
Summary of Contents for LNX Cube3
Page 1: ......