Functional parts and operation
29
4.3
LOADING AND EMPTYING THE DEVICE
NOTICE!
Before starting work, it is imperative that you familiarise yourself with the
section "Safety" and the special notes and warnings see section 2.2.2.
Only use the stipulated container sizes.
Make sure that the racks latch securely or the loading trolleys/tray
trolleys/mobile plate racks are securely positioned, and the containers are
firmly in place.
Always position containers in a horizontal position (supported at the same
height on the left and right).
Adhere to the maximum load.
We recommended that you do not place a container with liquids or cooked
products which liquefy during the cooking process in the combi steamer at a
height of above 1.60 m, measured from the access level.
Always remove the containers in a horizontal position and, wherever
possible, only move them with a cover attached.
Pos : 59 / 953-El oma/BET/ 4_F unkti ons teil e und Betrieb/G eniusMT /Tisc hgeräte_MM_GMT @ 18\ mod_1524225974776_6. doc @ 207336 @ 3444 @ 1
4.3.1
TABLE-TOP DEVICES
Without tray trolley/mobile plate rack
Open the cooking chamber door.
1.
2.
Insert the containers at the desired insert level.
Wherever possible, start at the bottom.
–
3.
Close the cooking chamber door and start the cooking process.
4.
Open the cooking chamber door.
5.
Remove the containers.
With tray trolley/mobile plate rack
INFORMATION:
Without racks only.
Check that the containers are properly in place in the loading trolley.
Only use suitable containers which are also firmly in place.
Summary of Contents for GENIUS MT
Page 169: ...Appendix 169 Ende der Liste für Textmar ke Inhalt4 ...
Page 170: ...Appendix 170 ...
Page 171: ...Appendix 171 ...
