background image

 

2

1.  Hints on operational safety 

 

 

Use for intended purpose 

 

 

The appliance shall only be used for its intended purpose, namely the professional 

 

preparation of food. 

 

 Installation 

  Follow the local regulations of the electricity supply companies and observe the instructions  

 

for the installation of kitchen equipment, as well as those given in the German standards  

 

DIN 1988, part 4 and DIN 1986 part 1. 

 

 

 

Do not install the appliance near to heat sources. 

 

Keep sufficient clearance, minimum clearance to side and back walls  50 mm. In case of an 

 

installation next to materials that are sensitive to heat or even might catch fire, make sure 

 

to observe the existing fire protection regulations. Do not block the air exhaust pipe. 

 

 

Electrical connection must be performed by an approved electrician. 

 

 Operation 

  Caution : The outer surfaces become hot in operation 

 

 

 

The convection oven may only be operated 

 

-- by trained staff 

 

-- for its intended purpose, as outlined in this operation manual 

 

-- when there are no defects. 

  Warning:  When opening the oven door, hot air and steam escape.  

 

Danger of burning. Use protective gloves. 

 
 

If the protecting glass cover of the oven lamp is defective, the appliance shall not be 

 

started. Call the after-sales service. 
In case of operating trouble, disconnect the oven from the mains, close water tap and call 
the after-sales service. 

  During the warranty period repair and maintenance work on the unit shall only be 

 

performed by technical service personnel trained by Eloma.  Please call the factory 

 

and inquire name and address of a competent after-sales service from the 

 

Eloma GmbH, Maisach Germany   +49/ 8141  395 117. 

 

Do not use a water hose or a high pressure sprayer on outer surfaces. 

 

A water jet may damage parts of the appliance or else get in contact with electric  

 

live parts. DANGER – personal injury caused by an electric shock.  

 
 

To avoid accidents the door lock has to be removed when dismantling and destroying the 

 appliance. 
 

 Noise 

level 

 

The emission value of the noise level is less than  70 dB (A). 

 

Summary of Contents for ELH 5-3





















Reviews: