Elo TouchSystems ETL121K/P-6PWA-1, User Manual

Page: 13 / 49

Basic Assembly Instructions
Elo LCD Touchmonitor User Guide - 11
Basic Assembly Instructions
Read the section about touchmonitor safety in Appendix D before
installing your touchmonitor. Also read the section about designing your
kiosk cabinet found in Appendix B.
Your touchmonitor is designed to operate from 100 to 240 VAC at 50 to
60 Hz. It automatically senses and adjusts for the supply voltage.
Do not install your touchmonitor where it will be subject to direct sun-
light, excessive dust, mechanical vibration or shock, or near heat
sources such as radiators or air ducts.
Pre-install Steps
1. Set the touchmonitor into the kiosk cabinet before connecting
the cables and plugging your PC into the wall socket. See Chap-
ter 4 for information on making any necessary display adjust-
ments.
2. After you make your display adjustments, settle the touchmoni-
tor into the cabinet.