A-Board Replacement
1. Remove and discard the old cord guide
plate. Install the new plate, do not tighten the
screw yet.
8
2. Gently slide the power supply
cable thru the cord guide and
behind the white post, as shown
in the picture. Failure to follow
these instructions can cause
power cord cable interference
with
motor
belt
which
can
damage the A board unit.
3. Connect the power supply
cable
to
the
power
supply.
Double
check
again
making
sure both wires are positioned
correctly. Tighten the cord guide
screw making sure not to pinch
the wires.
