- 69 -
(22) Tools
Select [Tools] from the menu bar, and the Tool menu shown below appears.
• Display Motion Detection .... Displays an area in which some motion is detected on the
MPEG4 live image screen.
• External GPIO On ................ Turns ON or OFF output from the general-purpose output
terminal.
• Always Top........................... Displays Viewer on top of the other screens displayed at
all times even if it is not active.
• Full Display Mode ................ Displays the image in the entire window, irrespective of
the image’s aspect ratio.
• Import Setup Data................. Reads the setup file created in “Export Setup Data” and
sets the Camera. Press the [Browse] button and designate
the setup file to be read, and press the [Import Start] button
and import the settings (available only when the Camera is
connected).
• Export Setup Data................. Creates each setting values of the Camera in a setup file
and saves the setup file in the PC. Press the [Browse]
button and designate the setup file path, and press the
[Export Start] button and export the settings (available
only when the Camera is connected).
Note:
“Import/Export Setup Data” must be executed on the cameras of the
same firmware version.
