- 46 -
Name
Function
To select the White Balance Setting mode [ATW, AWC, INDOOR,
OUTDOOR, FL-LIGHT, MWB].
WB
To adjust the white balance by way of continuous, automatic
following.
(When the image is in a single color all over, the white balance may
not be ajusted correctly.)
About the White Balance Setting mode
ATW
To adjust the white balance according to the then shooting status.
When the Setting mode is changed to [AWC] from the modes other,
be sure to set [TRIGGER] to ON.
AWC
This function is selected to shoot indoors.
The color temperature is assumed to be 3200K.
INDOOR
This function is selected to shoot outdoors.
The color temperature is assumed to be 6300K.
OUTDOOR
This function is selected when the Camera is used under the
fluorescent illumination. The color temperature is assumed to be
4200K.
FL-
LIGHT
To change the color tendency as desired.
MWB
To set the red color tendency [-30 +30] when [MWB] is selected.
MWB-R
To set the blue color tendency [-30 +30] when [MWB] is selected.
MWB-B
When [AWC] is selected and [TRIGGER] is set to “ON”, the white
balance is adjusted according to the current shooting status, by
selecting the [OK] button.
TRIGGER
(19) System Time Setup
Set the internal clock of the Camera. The time of this clock will be added to the file
name when sending an E-mail or FTP.
Note
: The built-in clock of the Camera can be set until December 31, 2036.
To operate each function of the Camera normally, use this system
time within the settable range.
