manualshive.com logo in svg

Elmo TD4114 IP II, Instruction Manual

Share
Download
Elmo TD4114 IP II Instruction Manual Download Page 31

- 30 -

(6) External GPIO Setup

You can set the activation mode of the external GPIO.

• Activation Mode ................... Used to set the output mode of the external GPIO output

terminal.

The GPIO is controlled by the ON/OFF of the activation

mode and GPIO. 

When the Camera is activated, the output is in the inactive

state (GPIO: OFF).

Normal Open...................... Close the contact during output to keep continuity.

Normal Close ..................... Open the contact during output.

(7) MPEG4 Setup

Make settings for obtaining MPEG4 images.

Note:

By changing this setting, the Camera itself may be reset and become

incapable of distributing images for a while.

• Bit Rate ................................. Designate the upper limit to the data amount to limit the

data amount generated during communication or image

distribution (setting range: 64 to 2000 kbps).

Summary of Contents for TD4114 IP II






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands