Elmo SUV-CAM BWV, Instruction Manual, Page: 7 / 66

Introduction (Continued)
7
BEFORE YOU USE
Temperature of the main body
When this recorder is used for a long time in the power-on state, the temperature of the main body may become high. However, this
is not a fault.
„
The power plug cord applicable to the local power specifications is attached. Be sure to use power cord applicable to your local
power specification.
„
Use only the attached AC adapter. Do not use any other AC adapter on any account.
„
Use this recorder under the following environmental conditions:
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: -10 to 80% (No condensation)
„
Do not place this recorder at any of the following places:
A place exposed to direct sunlight, a humid or dusty place, a place exposed to sea wind
A place with an extreme temperature or humidity variation, such as near an air conditioner
A place near magnet or magnetic field
„
Note: The recorder and the AC adapter are not waterproof.
„
Camera cable (Optional)
Note: Pulling or dragging the camera cable when using the camera could cause failure to the recorder or the camera.
Note: If there is a break or hole in the camera cable coating this could cause water penetration through such break or hole and
resultant failure in the recorder or the camera.
„
Do not clean the recorder with volatile solvent, such as thinner and benzene; this could cause the recorder to fail. Clean this
recorder only with a dry, soft cloth.