Elmo SUV-CAM BWV, Instruction Manual

Page: 25 / 66

25
Turn ON and Turn OFF the Power Supply
Turning ON the Power Supply
Before turning ON the power supply, be sure to load the SD memory card. ( Î P24)
1
Switch on the unit and enter the pin code for the SD card.
Slide the
【 POWER ＆ HOLD 】 button on the recorder to the left and
hold for approx. 3 seconds; then you are requested to enter the pin
code. After entering the correct pin code, you will see Playlist. The
unit will shut down by itself after entering wrong pin code for the third
time.
Setting of pin code (encryption of SD card) needs to be done by exclusive software.
The unit will shut down by itself after entering wrong pin code for the third time.
※ When turning ON the power
supply to the recorder for the first
time after the purchase, the
screen for setting the date and
time appears. (
Î P28)
The recorder sometimes takes a
recognition process for the SD card
inserted in it; for example after the
unit has been powered on or after you
show playlist screen from
configuration screen. During the
recognition process, you will see
“WAIT” on the screen. Please do not
press any button on the recorder at
this time; otherwise the unit may fail
the recognition process.
Playlist screen
SUV-Cam
Startup screen
POWER
●
HOLD