Elmo ProVidient EMR-16, Instruction Manual, Page: 69 / 126

Recording Schedule Setup
Automatic recording conditions can be set up for each camera.
REC SCHEDULE SETUP
ALL CLEAR
CAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TIME 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
SUN
MON
TUE
WED
THU
FRI
SAT
HOL
POST TIME ALARM 9 9 9 SEC ALARM MOTION CONTINUE
MOTION 9 9 9 SEC ALARM&MOTION
ALARM&CONTINUE
COPY TO
CAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ENTER
PREV
NEXT MENU
<Setup Procedure>
1.
Select from “CAM1 ～ 16” the camera for which schedule is set up.
2.
Select the event for automatic recording and set up the day of the week and time. Setup is
possible in units of 30 minutes.
⇒
The color of setup time zone changes to the same color of the event button selected.
Example) “ALARM” event is set up for 0:00 to 8:30 on Sunday.
TIME 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
SUN
MON
TUE
WED
THU
FRI
SAT
HOL
POST TIME ALARM 9 9 9 SEC ALARM MOTION CONTINUE
MOTION 9 9 9 SEC ALARM&MOTION
Using Keys
Using the “3,” “6,” “8,” and “11” keys, move the cursor to the “ALARM” button, and select by
pushing it with the “7” key.
Using the “3,” “6,” “8,” and “11” keys, move the cursor to the intended date and time frame, and
change the setup by pushing “UP” and “DOWN” keys. Pushing the “UP” and “DOWN” keys,
select the range. Pushing the “7” key enters the change. When the cursor is moved to the sections
for days of the week, and a day is selected by pushing the “7” key, one whole day is selected for
that day of the week.
Using Mouse
Click on the “ALARM” button. Drag the frames of the intended date and time using a mouse.
* Selecting “ALL CLEAR” cancels all the schedule setup.
3.
Enter the recording time after an alarm and motion event in the section of “POST TIME
ALARM” and “POST TIME MOTION.”
4.
Select the camera to which the setup is copied, and select “ENTER.”
5.
Conduct the setup for each camera following the above procedure 1 to 4.
- 63 -
1
2
3