Elmo ProVidient EMR-16, Instruction Manual, Page: 35 / 126

Note
y Playback begins from the point where the last playback or backward playback stopped. When the
playback continues to the beginning or the end of the recorded data, playback stops and returns to
“E L M O” logo displayed.
y When the power is turned on or the point of the last playback or backward playback has been
overwritten, playback starts from the oldest point and backward playback starts from the newest
point. While overwrite recording is in progress, playback cannot be conducted. Conduct Search and
then play back.
y Pushing “ ” key skips to the oldest point and begins playback. Pushing the “ ” key skips to the
newest recorded point and begins backward playback.
y NOTE: “ LAYOUT” is not displayed unless LAYOUT MODE of System Setup is set to ACTIVE.
Changing Playback Speed
y By using Jog Dial:
During playback, turning Jog Dial in the FF (Forward) direction changes the speed of forward
playback as follows:
“
－ 10 mins → － 1 min → － 8× → － 4× → － 2× → 1× → 2× → 4× → 8× → 1 min → 10 mins”
During playback, turning Jog Dial in the REW (Backward) direction changes the speed of backward
playback as follows:
“10 mins
→ 1 min → 8× → 4× → 2× → 1× → － 2× → － 4× → － 8× → － 1 min → － 10 mins”
y
By using Shuttle Dial:
Turing Shuttle Dial during playback in the REW (Backward) or FF (Forward) direction plays
backward or forward from normal speed to 8×, 1 minuite, and 10 minuites.
Jog Dial
Shuttle Dial
Caution
y Fast playback might not necessarily be played at the indicated speed.
Playback Frame by Frame
y By using Jog Dial:
Turing Jog Dial in the REW (Backward) or FF (Forward) direction during Pause plays still images
frame by frame.
Jog Dial
Shuttle Dial
- 29 -