Elmo ProVidient EMR-16, Instruction Manual, Page: 32 / 126

Manual Recording
1.
Pushing the “Recording” key once again stops the recording.
2.
Push the “Recording” key during live feed display or playback.
⇒
“RECORDING” indicator lights up and manual recording begins according to the recording
setup.
Note
Pushing the “Recording” key during automatic recording switches to manual recording mode. When the
automatic recording conditions (continue, alarm, or motion) happen during manual recording, these do
not start recording.
Using Automatic Recording Mode
Set the continue recording, alarm recording and motion recording conditions for each camera. ( → See
P.61 for setting up the conditions)
⇒ When the setup conditions happen, automatically begins recording.
y
Continue Recording
Timer recording begins when the set time for automatic recording comes.
When alarm signal or motion detection is input while the alarm or motion mode is set in addition to
the timer setup, alarm or motion recording begins. When the alarm or motion recording ends while it
is still within the timer setup, the recording mode is shifted to timer recording.
y Alarm Recording
When alarm signal is input to the set channel, alarm recording begins.
In case the buzzer sound output is set in “EFFECT” under “System Setup,” the buzzer sounds. (The
buzzer can be deactivated using the “STOP” key)
When another alarm input or motion detection happens during alarm recording, the newly input
alarm recording or motion recording begins.
y Motion Recording
When a movement is detected within the detection area on the screen, motion recording begins.
In case the buzzer sound output is set in “EFFECT” under “System Setup,” the buzzer sounds. (The
buzzer can be deactivated using the “STOP” key)
When alarm input or motion detection happens during motion recording, the recording mode is
shifted to the newly input alarm recording or motion recording.
Caution
y
Extended recording is stored on HDD
−
A by priority. As HDD
−
A becomes full, the data is next
stored on HDD
−
B. In case expansion hard disk units are mounted, the recording is stored in the
order of HDD
−
C → HDD
−
D → HDD
−
E → HDD
−
F.
y When synchronizing signal of video input cannot be detected, the equipment regards it as video
defect, lighting up Alarm Indicator, Buzzer sound, Alarm Input, and recording of error log.
- 26 -
y
When the recording settings are changed, the recording will be finished and the settings will be
initialized even if the recording is in process. When the pre-recording is is process, the recording will
restart form the time when the settings are changed.