Elmo ProVidient EMR-16, Instruction Manual, Page: 24 / 126

H
S
ow To Use
Below are basic explanations for using this equipment:
tarting Up
1.
Connect the provided power cable and each device appropriately.
2.
Turn the POWER Switch on the back face “ON.”
3.
The screen shows the System Check display, and the hard disk Connection Check begins.
During the Connection Check, the “POWER” key flickers.
→
EMR-16
Ve
SYSTEM INITIALIZING.
●●●●●
r 1.00
0009
After the System Check finishes, the “POWER” key changes to lighting mode, and a live feed is shown.
(In case of factory default setup)
L1 L2 L3 L4
L5 L6 L7 L8
L9 L10 L11 L12
L13 L14 L15 L16
Turning Off
1.
Turn off the POWER switch on the back face.
This turns the power “OFF.”
Caution
y Do not turn off the power during the manual or automatic recording. It can damage the recorded
data.
- 18 -