3
General safety
•
Use only as directed in the operating instructions provided.
•
The unit should not be used if it has encountered a physical shock or has been dropped.
•
The unit must be stored and transported in a horizontal position (see package label).
•
After transport or storage allow the unit to dry out (2-3 hrs.) before connecting to mains power.
•
Use only original accessories provided by the manufacturer and ordered
specifically for this model.
Electrical safety
•
Connect to the mains only with a voltage corresponding to that on the serial number label.
•
Ensure that the switch and plug are easily accessible during use.
•
Do not plug the unit into the main outlet without grounding, and do not use extension lead without
grounding.
•
Before moving the unit, disconnect it from the mains. To turn off the unit, disconnect the power plug
from the mains outlet.
•
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on
or inside the equipment. If liquid is split inside the unit, disconnect it from the mains and have it
checked by a competent person.
During operation
•
Do not block the platform movement.
•
Do not leave the operating unit unattended.
•
Do not operate the unit in environments with aggressive or explosive chemical mixtures.
•
Do not operate the unit if it is faulty or been incorrectly installed.
•
For indoor use only.
•
Before using any cleaning or decontamination method except those recommended by the manufacturer,
check with the manufacturer that the proposed method will not damage the equipment.
•
Do not make modifications to the unit.
Biological safety
•
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt
on or inside the equipment.
Preparation to use
•
Unpack the device. Please keep the packaging material for transportation or storage purposes.
•
If the machine was stored at a temperature below 0°C, make sure that it is kept at room
temperature for at least two hours before turning it on.
•
Place the shaker onto a level, horizontal surface.
•
Examine the power adapter and appearance of device for damage.
•
Connect the power cord to the centrifuge, insert the adapter in to the socket and press network
switch at ( I ) symbol. Display will light up on the control panel.
•
Check the platform. Try rotating it by hand. There should be no noise or obstacles to smooth
running.
•
Check the surrounding of device. Safety distance of 30cm must be observed around the device
during operation.
•
Check for other signs of damage or malfunction.
ATTENTION!
If there is any apparent damage or malfunction, DO NOT TURN ON the shaker
without consulting a specialist.
