ELMETRON CC- 411, User Manual, Page: 5 / 52

CONTENTS
I. INTRODUCTION 1
1. Exploitation notices 3
2. Characteristics of the meter 4
3. What is the meter designed for 5
4. The outside view 6
5. Switching the meter on and off 9
6. Preparation to work 10
6.1. Choosing the measuring function and unit 10
6.2. Choosing the kind of temperature compensation 11
6.3. Entering the temperature value for manual temperature
compensation
11
II. CONDUCTIVITY MEASUREMENT 13
7. Basic information about the conductivity measurement 15
8. Choice and maintenance of the conductivity cell 16
8.1. Choice of the conductivity cell 16
8.2. The conductivity cell maintenance 17
9. Calibration of the conductivity cell 18
9.1. Calibration without the standard solution 18
9.2. Calibration with use of standard solution 19
10. Conductivity measurement 22
10.1. Conductivity measurement without temperature compensation 22
10.2. Conductivity measurement with automatic temperature
compensation 23
10.3. Conductivity measurement with manual temperature compensation24
10.4. Conductivity measurement in honey
25
10.5. Preparation of the measurement sample 25
11. Salinity measurement 26
11.1. Salinity measurement with conversion to NaCl 27
11.2. Salinity measurement with conversion to TDS 27
III. TEMPERATURE MEASUREMENT 29
12. Temperature measurement 31
IV. OTHER 33
13. Readout of the software version number 35
14. Power source and changing the battery 36
15. Technical data 37
16. Equipment 38