ELMETRON CC- 411, User Manual, Page: 41 / 52

- 35 -
13. READOUT OF THE SOFTWARE VERSION NUMBER
In order to check the software version number turn the meter off and next,
holding the button, turn the meter on by pressing the
button.
Instead of the display test, the screen as in the picture below will appear
(Pic. 15). In the upper row the software version will appear and in the lower
row a type of internal power supply, to which the meter has been adjusted:
- internally powered by two rechargeable R6/AA batteries;;
- internally powered by two standard R6/AA batteries.
Pic. 15
After about 1,5 s. the meter enters the measurement mode.