Operation manual ISOTEST 4 S / 4 S
p l u s
Page 3
Product description
1. Proper Use
ELMED ISOTEST
®
test equipment has been exclusively designed for
mobile testing of non-porosity of non-conducting or semiconducting
materials, especially insulation, and may only be used for this purpose.
-
The equipment is not designed to be used for the stationary
continuous operation.
-
Other use than described above is prohibited.
Please note that
operating the equipment in explosion-hazard environments is
strictly forbidden.
Proper use extends on reading these operating instructions as well as
meeting all relevant requirements, especially safety regulations.
Furthermore, all inspection and maintenance should be performed within
the specified time intervals.
During the operation of ISOTEST
®
test equipment, radio equipment
or radio services may be affected by radio interference. In these
cases, the equipment must not be used. The equipment should
always be turned on only for a minimum period of time.
ISOTEST
®
test equipment may only be operated by trained personnel.
If ISOTEST
®
test equipment is not used as described above, safe
operation cannot be guaranteed.
The manufacturer does not assume any liability for injuries of persons or
damage to equipment if the test equipment is not properly used.
These operating instructions apply to all units of the following series:
ISOTEST 4S and 4S
plus
