Page 14
Operation manual ISOTEST 4 S / 4 S
p l u s
By using suitable testing electrodes, a test method should be available
that avoids touching of the testing electrodes during the tests.
To maintain the high safety standards, only original ELMED accessories
such as testing electrodes may be used.
4. Operator requirements
ISOTEST
®
test equipment must not be used by unqualified or
unauthorized personnel. Persons who intend to operate the test
equipment must have read the operating instructions, especially Chapter
"Safety Information", and observe these instructions.
These persons must have been trained in the basic regulations on
industrial safety and accident prevention.
Operating personal still being in the training phase must not operate the
ISOTEST
®
test equipment unless supervised by a sufficiently trained
person.
A certificate of a successfully completed training course is required.
