19
UM/SWHM/V3/0115
21
Press DOWN key
Row : 5.000 A.t. ( Auto
scroll time)5.000 (
Default)
Range: 1 to 10 seconds
Display increment during auto
scroll.
22
Press DOWN key
R o w : S A V E
Row 2: “Y” blinking.
If “
n
”(no) is selected then Meter
enters into RUN mode without
memorizing any edited Values in
the setup
The List of parameters that can be configured and the range is given below
Sl. No.
Parameter
Default setup
Range
1
Over Voltage(L-N) [ O.V ]
285.0
80V-310V
2
Over KVA
52.00
52-999K
3
Individual phases change on DG
RYB
R (or) Y (or) B (or) RYB
(or) No DG
4
Delay Time [d.t]
5.000
1-180s
5
Baud rate [b]
9600
2400 to 19.2k
6
Parity(P)
EVEn
Even/ Odd/ no
7
Device Id (I d)
1.000
1.000 to 247.0
8
Password
1000
1000 to 9999
9
Energy selection mode [E.S]
rESO
rESO /COUΠ
10
Display increment time during auto scroll [A.t]
5.000
1 to 10 seconds
Enabling and Disabling of Auto scrolling:
Enabling Auto Scrolling:
Press DOWN key continuously for 5 seconds or until display shows
EnAb.Au
for downward scrolling. The auto scrolling will be enabled automatically when the meter is OFF and
ON.
Disabling Auto Scrolling:
Press UP/DOWN key to disable auto scrolling. Display shows dlSA.Au
and
returns to normal mode.
4.4.
PREPAID OPTIONS
RF based
•
Secured Encrypted RF Smart Card based recharging
•
Elmeasure encryption also added for improving the security
•
Can have multiple card- one with low value charged for emergency
•
Over KVA tripping when the meter is running in DG (programmable through the smart card)
•
Reconnection time is programmable-10sec, 1 min, 10 min, 2 hrs. monthly fixed charges based
on KVA/KW
•
RTC option available: Holiday and night time cutoff prevention, Grace amount can be set from
factory, Option of programming for non tripping during week end
