17
UM/SWHM/V3/0115
7
Press DOWN key to go to
the next parameter
Row: 01.01. d
Defines the Month & Date of the
clock.
First two digits define the month
selection & another two digits
mention the date.
8
Press the UP key to select
the Month & Date
Row: 01. 01. d (default).
First two digits blinking
which is “month”
selection can be edited
using down key.
Selected mode will blinks and it can
be set to the desired range using
Down key.
Eg: Month need to be set April , set
the selected blink value as “04”
using DOWN key
9
Press UP key to accept the
edited value for month.
Row: 04.01. d
Second digit blinking
which is “Date” selection,
it can be edited using
DOWN key. Press UP key
to accept the edited
value.
10
Press DOWN key to go to
the next parameter
Row: 00.01. t ( Default)
It defines the RTC time settings.
It is in HH:MM format.
11
Press the UP key to select
the Hour & Minute.
Row: 01.01. t
Follow the procedure
steps 8 & 9 for set the
Hour & minute.
12
Press DOWN key to go to
the next parameter
Row: 52.00 Eb (Default in
3phase).
17.50 Eb(Default in single
phase)
Over KVA EB
It defines the over KVA tripping
value for Eb.
Range: up to 9999 Mega
13
Press UP key to select the
over KVA value.
Row: 52.00 Eb.
First digit starts blinking
can be edited using
DOWN key.
(selected mode blinks)
14
Press UP key to accept the
edited value for first digit.
Row: 52.00 Eb
Second digit blinking, can
be edited using DOWN
key. Press UP key to
accept the edited value.
Continue the same
method until fourth digit.
Program range for Over KVA: 52.00
Kilo- 9999.0 Mega.
15
Press UP key
Row: 52.00 K Eb.
Decimal point blinking. It
can be set at appropriate
location using DOWN key.
Ascertain the correct
scale (Kilo, Mega) is
selected. Press UP key to
accept the edited value.
Egg. To set 11.00 K.
Set first four digits (1100) as
explained above. Press DOWN key
to place decimal point at
appropriate location with
respective LED (kilo, Mega)
indication.
