6
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200545_03B May 2016 ©2016 ELMDENE INTERNATIONAL LTD
Tamper
19)
Connect tamper switch to appropriate inputs of control and indicating equipment (CIE).
Fig 7 Position of tamper assembly on ‘hinged lid’ style enclosures
Fig 8 Position of tamper assembly on ‘clam shell’ style enclosures
20)
Close the lid and fasten with screw supplied. Alternatively fit the cover in place, the correct orientation
is with the cover retaining feature engaging over the bottom lip of the base, fasten with screws
supplied.
21)
Check that the tamper switch is:
CLOSED when the lid/cover is closed and the retaining screws are fitted.
OPEN when the retaining screws are removed the lid/cover is open.
Use fine adjustment screw if necessary to align set position indicator with set point.
22)
Close the lid/cover and fasten.
23)
Re-check tamper circuit is closed at control panel.
Tamper Switch Connections
Set position indicator
Fine adjustment screw
Lid Fixing Screw
(Sets tamper switch)
Lid Fixing Screw
(Sets tamper switch)
Tamper switch Connections
Fine adjustment screw
Set position indicator
