How to replace the heating
42
SM/Transsonic_LC/1104/D
© Elma GmbH & Co KG
Red dotted lines: Cut silicone fixation here to remove the heating
elements
Push the heating element(s) out of the guiding rails in the marked
direction
Push the heating element out of the guiding rails toward (A).
The new heating element can be pushed into position more
easily if the edges of the aluminum profile are rounded off with
a file.
Put the new heating element into the guiding rails. Carefully
push it into the guiding rails without jamming.
Then secure against displacement with silicone.
Illustration 9.3. Removed tank with vertically mounted heating
elements
Red dotted lines: Cut silicone fixation here to remove the heating
elements
Push the heating element(s) out of the guiding rails in the marked
direction.
Push the heating element downward out of the guiding rails.
Put the new heating element into the guiding rails from above.
Carefully push it down into the guiding rails without jamming.
A
B
Position of heating
elements on T1040H,
T1060H
B
A
A
B
Summary of Contents for LC130H
Page 2: ......