Appendix 2: Pager
112
BA_Elmasolvex_VA_EN_Vers.05.2018
© Elma Schmidbauer GmbH
15
Appendix 2: Pager
The pager is a hand-held device for mobile remaining time
display of the cleaning program.
As soon as a cleaning program has been started (
see
Chapter 6.3 and Fig. 6.3.4
), the remaining running time of the
cleaning program can be transmitted from the cleaning machine
to the pager.
The distance from the cleaning machine is not relevant for
displaying the remaining running time afterwards.
Fig. 15.1 Pager front / rear view
1. First start the cleaning program.
2. Make the pager ready by shaking it for a short time: As soon
as the green LEDs flash alternately (running light), the
pager is ready for data reception for 30 seconds.
3. Hold the pager with the rear side facing the display.
The sensor on the rear side of the pager (
Fig. 15.1.A
) must
then be located in the range of the display.
4. Press the operating button #2 (see
Fig. 15.2.#2
). The data
transmission is performed.
As soon as the LED for cleaning time on the pager lights, the
data transmission is completed and the pager is activated.
Activating pager
A
