Elma 46
27
v. 170309
7
Data Memory and read function.
1. Press MR key each time, stores one set logged data in memory, LCD shows M and memory
location numbers (01 to 99). If there is no test data it cannot perform this mode.
2. Press MR key for 2 seconds to enter the rad memory data mode, LCD shows R and memory
location numbers, additional information can be viewed with the
▲/ ▼ key.
3. Press
key to scroll through the logged readings.
4.
Press MR again to exit READ mode, LCD show “
Out r EAD
”.
7.1
Erase the memory of datalogger:
1
Press
key to turn off the meter.
2
Press and hold down MR key the press
to turn on the meter, until LCD shows
“
dEL
”,
press
▲▼ keys to cycle display “
YES
” or ”
NO
, select “YES” and press
key to clear all
memory.
