background image

Roto-Jet II 

23

WaRRanTy

Should any part, of Seller’s own manufacture, prove to have been defective in material or workmanship 
when shipped (as determined by Seller), Seller warrants that it will, at its sole option, repair or replace 
said part f.o.b., point of manufacture, provided that Buyer notifies, in writing, of such defect within 
twenty-four (24) months from date of shipment from the manufacturing plant. 

On request of Seller, the part claimed to be defective will be returned, transportation, insurance, taxes 
and duties prepaid, to the factory where made, for inspection. Any item, which has been purchased by 
Seller, is warranted only to the extent of the original manufacturer’s warranty to Seller. 
Seller shall not be liable for any damages or delays caused by defective material or workmanship. 

No allowance will be made for repairs or alterations made by others without Seller’s written consent or 
approval. If repairs or alterations are attempted without Seller’s consent, Seller’s warranty is void. 

THE WARRANTIES PROVIDED IN THE OBLIGATIONS AND LIABILITIES OF SELLER HEREUNDER, 
AND THE RIGHTS AND REMEDIES OF BUYER HEREUNDER ARE EXCLUSIVE AND IN 
SUBSTITUTION FOR, AND BUYER HEREBY WAIVES ALL OTHER WARRANTIES, GUARANTEES, 
OBLIGATIONS, CLAIMS FOR LIABILITIES, RIGHTS AND REMEDIES, EXPRESS OR IMPLIED, 
ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY 
FOR MERCHANTABILITY AND FITNESS FOR PURPOSE.
 
Seller’s total liability is limited to the lower of the cost of repair or replacement.

Summary of Contents for Roto-Jet II 0650



























Reviews: