Elliott Roto-Jet II 0650, Operating And Maintenance Instructions Manual

Page: 7 / 26

Roto-Jet II
7
Manual Reset
1. Plug the GFI into a 3-wire 120 Volt grounded receptacle.
2. Fully press the reset button marked (marked “R”) and release. The unit should power up
and the amber “POWER ON” light should glow.
3. Fully press the test button (marked “T”) and release. The power light should go off.
4. Press and release the reset button again. Verify that the power light is on and the GFI is
now operational.
5. If the GFI fails to reset, or fails to turn off when all appropriate buttons are pressed, check
to make sure that:
a.) You have fully depressed and released the proper buttons.
b.) There are no loose wire strands or foreign materials in the access chamber of the
GFI plug that may cause a fault.
6. If the GFI still cannot complete the cycle described in steps 2 through 4 above and after
checking the items in step 5,the unit is not functioning. Contact Elliott for repairs.