Warranty Activation Form
1 of 2
Model:
Serial Number:
Purchase Date: Purchase Price:
Place of Purchase:
Contact Name: Phone Number:
Upon completing the installation of an Ella Walk In Bath, the following Warranty
Activation Form must be completed, signed by both the customer and installer, and
returned to Ella’s Bubbles, LLC. In order for the Warranty to be activated (faxed,
scanned, or emailed, or hard copy mailed).
To be initialed by the installer(s)
At the time of delivery, all products were inspected thoroughly and any damage to
crates, boxes, or cartons was noted on the appropriate paperwork.
Shower floor is level and has been installed with the proper adhesive or mortar
compound in accordance to the manufacturer’s specifications. As mortar/adhesive
sets up, make sure the proper drain slope has been maintained. Base should slope
towards drain in all directions (test by using a 2 food level from the drain to all adjacent
walls)
All cure times for bonding/sealing agents have been properly observed and the
customer has been clearly notified and instructed to obey such guidelines before using
the product.
Shower drain is installed properly and has been tested to ensure that it is free of defect
and does not leak.
Shower walls are lined up properly and there is a uniform gap of no more than 1/8”
between each section that has been sealed with 100% silicone. Silicone beads are
consistent and have been inspected and are free of any pin holes or debris that may
cause leaks.
Shower valve and all plumbing components have been pressure tested and are func-
tioning properly without any leaks.
All accessories which may be mounted to the shower walls (including shower seats,
grab bars, soap dishes, shower mounts...etc) have been anchored properly and
installed in accordance with the manufacturer’s instructions and additional bracing has
been added if weight limits are exceeded.
www.ellasbubbles.com
Page 21 11/13
