12. Dry fit end caps to insure proper fit. (Trim length if required after stretching & adhering dam)
13. Once proper fit is verified, prepare to apply silicone adhesive caulking.
14. Apply quality silicone adhesive caulking to floor, side wall and male insert end of cap. Push in the
male end of your end cap into the water retainer.
15. Wipe clean with rubbing alcohol.
16. Allow 12 hours until adhesive cures before use.
17. Tile Application Grout Line joints: The grout joints or entire outer edge beneath the retainer must
be caulked to prevent soap and shower debris from lodging beneath the retainer. The adhesive
tape does not extend to the edge (by design) to allow the retainer to absorb the impact energy of a
rolling shower chair in high use applications. Wipe off excess caulk and let cure (according to caulk
specifications) prior to shower use.
©
2013, The Praxis Companies, LLC
435 Industrial Rd., Savannah, TN 38372
Customer Service: 800.443.7269
www.praxiscompanies.com
Collapsible Continued
www.ellasbubbles.com
Page 19 11/13
