7
7. Attach the Front Shroud onto the monitor as shown with six of the #10-32 Pan Head
Screws provided. Insert the nozzle wire harness through the shroud and install the
rubber grommet in the hole as shown. Attach four of the Light Module Support Brackets
into the locations shown using the provided #8-32 screws. Apply blue Loctite #243 or
equivalent thread locker onto all the female threaded holes in the various brackets and
standoffs before assembling.
8. Connect the Left and Right Light Module cables to the respective cables coming from
the Back Light Module as shown. Mount the Left and Right Light Modules to the Shroud
Covers as shown with the provided #8-32 Socket Head Screws (Tuck the Side Light
Module wires inside the Shroud Assembly). Blue Loctite #243 or an equivalent thread
locker should be applied to the female threaded holes of the brackets.
Attach Front Shroud
Connect Side Light Module Cables
(A Portion of the Back Shroud is Hidden in This View)
Attach Side Light Modules
Attach Light Module Brackets
(A Portion of the Front Shroud is Hidden in This View)
