6
5. Attach two Light Module Support brackets onto the back half of the monitor shroud with
four of the provided Socket Head #8-32 screws as shown. Attach the Back Light Module
to the back half of the shroud with the four Pan Head #8-32 screws provided (Insert the
Light Module wires through the cutout in the shroud). Orient the Back Light Module as
shown. Apply blue Loctite #243 or an equivalent thread locker onto the female threaded
holes of the brackets before assembling.
6. Connect the Back Light Module to the EXM2 Module using the appropriate Deutsch
connector. Attach the Back Shroud to the monitor using six of the #10-32 Pan Head
screws provided. Apply blue Loctite #243 or equivalent thread locker onto the female
threaded holes of the brackets and standoffs before assembling.
Attach Light Module Support
Brackets
Connect Module Wires
Attach Back Light Module
Attach Back Shroud
