• Care & Maintenance
1. When the power is disconnected: The system memory will store all set parameters. After three days the clock will reset but
all parameters will be saved.
2. Periodically check for leaks at the fi lter and pipes to avoid property loss due to leakage.
3. When the fi lter system will not be in use for a long period of time, close the inlet source (turn off inlet ball valve) and disconnect
the power supply.
4. If you don’t use the machine for a long time, the system should be regenerated. This will allow the best system performance.
5. In case of any of the following situations, please turn off the water to the system and use the bypass valve to bypass the
softener. Disconnect the power supply if any of the following occur:
• Leaks from pipe or related parts of the system
• Component failure of the fi lter
• Any other abnormality or fault
6. In case of decreased fl ow or changes of outlet quality, contact Customer Care.
Note:
Changes of household water consumption, utilization habit or water source quality may adjustment of the control system
parameters. In case of any one of the situations as above, please contact Customer Care.
7. Contact Customer Care for fi lter replacement if the following situations occur.
• Dramatic decrease of outlet fl ow
• Poor outlet quality
The ELKAY Central Water Softener ESR3100D-A is warranted to be free from defects in materials and workmanship for a period
of one year from date of installation.
Warranty is limited to repair or replacement of defective component.
Warranty
Page 12
1000003996 (Rev A - 05/2017)
International Customer Care 630-575-4755 [email protected]
