Elka T 3000, Installation And Operating Instructions Manual

Page: 6 / 45

T 3000 - T 3500
5
2 Safety
2.1 General notes on safety
The valid regulations and standards have to be observed during installation
and operation, e.g. DIN EN 13241-1, DIN EN 12445, DIN EN 12453 etc. Only
the use of spare parts made by the original manufacturer is allowed.
Do not put a defective barrier into operation.
After set-up (installation) every user of the equipment has to be instructed
about the operation and function of the barrier.
In order to reduce the risk potential related to the movement of the barrier
boom, additional optical and/or acoustical warning devices should be installed.
2.2 Notes on safety for the operation
Children and not instructed persons are not allowed to operate the barrier.
No persons, objects, or animals are allowed within the range of the barrier
movement during opening or closing.
Never reach into moving parts of the barrier.
Drive through the barrier only after complete opening.
The barrier has to be secured depending on the type of usage, corresponding
to the valid standards and regulations.
The safety devices have to be checked regularly for functioning according to
the standards and regulations, at least twice a year.
2.3 Notes on safety for the operation with radio remote
control
The radio remote control should only be used, if the area of movement of the
barrier is always completely visible by the operator and thus it is assured, that
no person, object, or animal is present within this range of movement.
The radio remote control transmitters have to be carefully kept, so that an
unintentional use is impossible.
Radio remote controls should not be operated at radio-technical sensitive
locations, like airports or hospitals.
Interferences by other (properly operated) radio communication installations,
which are used within the same frequency range, cannot be ruled out.