ELK-M1XRF319 Installation Manual
Page 15
Once the first Wireless Receiver has been installed and operational additional receivers can be installed for redundancy or im-
proved coverage and range. Each addtional Wireless Receiver must be assigned its own data bus address and must be enrolled
into the control. The data bus address setting of any additional Wireless Receivers can be any unused data bus address from 2 to
10. ADDRESS 11, 12, 13, 14, 15, or 16 CANNOT BE USED.
NOTE: Wireless Receiver expanders MUST NEVER be assigned to addresses currently occupied by Hardwired Expand-
ers, and vice versa. In the example below the first Wireless Receiver (in center) is assigned as Address 2. The additional
Receivers are Addresses 3 and 4. In theory it is possible to install up to 9 total Wireless Receivers on a single M1 Control
provided none of those addresses are being used by a Hardwired Expander.
* For large installations or added coverage in areas experiencing poor wireless conditions additional Wireless Receivers can be connected to the data bus. Each Receiver
must be assigned its own Bus Address and be enrolled for proper supervision. Loss of any enrolled bus device causes a Missing Bus Device Trouble.
Offices
Shipping
First Wireless
Receiver
Bus Address 2
Warehouse
Production
Sales
Example of larger Commercial Building with 3 Wireless Receivers
Additional Wireless
Receiver
Bus Address 3
Additional Wireless
Receiver
Bus Address 4
Appendix C - Installing Multiple Redundant Receivers
