20 - EN
V800
(To configure the device for this purpose, open the folder identified by the ‘Add’ label and use parameters:
• PtS to select the TelevisSystem / Modbus RTU protocol
• TelevisSystem: dEA and FAA.
• Modbus RTU: dEA / FAA / PtY for the parity / Ptb for the baud rate.
NOTE: the connection serial port between the devices is powered.
Dip Switch Protocol Selection
Protocol Selection
LED C
Protocol
3
yellow
LAN
OFF
OFF
Televis/Modbus
ON
ON
LAN
DipSwitch3=OFF only for use with IWK/V
NOTE: TTL port shall NOT be connected to any
device
Televis/Modbus
DipSwitch3=ON per Televis/Modbus supervision or use
with DMI/CC
NOTA: IWK/V shall NOT be connected