31 - EN
V800
FOLD
PAR. DESCRIPTION
RANGE
DEF.
U.o.M.
VAL
CnF
H60
Plant Type. 0, 5...16 = NOT USED.
1 = ducted showcases and quick variation evaporator pressure (e.g. step control);
2 = ducted showcases and controlled/gradual evaporator pressure (e.g. INVERTER control);
3 = showcases with compressor on board;
4 = showcases with compressor on board and renewing exchanger.
0...16
1
number
Add
COMMUNICATION
Add
PtS
Protocol selection. t= Televis; d=Modbus.
t/d
t
flag
Add
dEA
Index of the device within the family (valid values from 0 to 14).
0...14
0
number
Add
FAA
Device family (valid values from 0 to 14). The pair of values FAA and dEA are the network address of
the device and are given in the format ‘FF.DD’ (where FF=FAA and DD=dEA).
0...14
0
number
Add
PtY
Modbus parity bit.
n= none; E=Even; o=odd
n/E/o
E
number
Add
Ptb
Baud rate.
12=1200 baud; 24=2400 baud; 48=4800 baud; 96=9600 baud; 192=19200 baud; 38400=384
baud. If PtS= t (Televis) set Ptb to 96= 9600 baud.
12/.../384
96
number
OP
MAXIMUM OPERATING PRESSURE (MOP)
OP
HOE
Enable MOP. n= MOP disabled; y = MOP enabled.
n/y
n
flag
OP
HdP
MOP disable time. MOP activation delay on startup or on reset after a defrosting cycle.
0...999
0
sec
OP
HOt
Evaporator temperature upper threshold.
-60.0...100.0
0.0
°C/°F
