G.SHDSL Router - AH507
Version 1.0
83
Virtual Server
Port Forwarding is usually set up for related services, such as web servers, FTP servers,
E-mail servers etc reside at the private network. Most of the case, you need a public IP
address for each server and this public IP address or domain name is accessed by all
users.
Since the server is actually located inside the private network and well protected by NAT
of AH507, access request with public IP address from external users is mapped to the
private IP address/port of the server
To configure, go through the following steps.
Specify the IP address of the correspondent local server, e.g., Web, FTP or Telnet.
Check the button to enable these servers.
Specify the name of the application.
Specify the starting global port number as Port Start indicated.
Specify the starting global port number as Port End indicated.
Select the protocol, TCP or UDP passing through this port from the pull-down
menu. .
Specify the WAN channel number.
Specify the IP address of the local server at which the Internet user is accessible.
Check the button to enable it.
