G.SHDSL Router - AH507
Version 1.0
34
The details of item are described in the following table:
Item
Field Name
Description
Value
A
ISP Name
ISP Name
Max. 18
characters
VPI
Virtual Path Identifier, given by ISP
0 – 16
VCI
Virtual Channel Identifier, given by ISP
33 - 4096
Encapsulation
The encapsulation type is given by ISP.
Press ‘Space Bar’ to select the setting.
RFC2684 / IPoA /
PPPoE / PPPoA
Default: RFC2684
B
Multiplex
Header to identify the protocol that
Virtual Circuit being carrying.
LLC: Logical Link Control Multiplexing
VCMUX : VC-based Multiplexing
By press ‘Space Bar’ to select the
setting.
LLC / VCMUX
Default: LLC
C
QoS
Quality of Services
UBR: Unspecified Bit Rate.
CBR: Constant Bit Rate.
rt-VBR: Real-Time Variable Bit Rate.
nrt-VBR: Non-Real-Time Variable Bit
Rate.
Press ‘Space Bar’ to select the setting.
UBR / CBR / rt-
VBR / nrt-VBR
Default: UBR
D
Peak Cell Rate
(PCR)
The maximum transmission rate.
0 - 5424
E
Sustained Cell
Rate (SCR)
The Transmission rate in a burst traffic.
0 - PCR
F
Maximum Burst
Size (MBS)
Maximum number of transmission cell
at the peak rate.
0 - 1000
G
Dynamic IP
Address
Press ‘Space Bar’ to select the setting.
Disable/Enable
Default: Disable
H
IP Un-numbered
Press ‘Space Bar’ to select the setting.
Disable/Enable
I
WAN IP Address
The WAN local IP Address of router,
given by ISP
i.e ‘123.221.79.2’
WAN IP Subnet
Mask
The WAN local IP subnet mask of
router, given by ISP
i.e ‘255.0.0.0’
J
Remote IP
Address
The IP Address of DSLAM, given by
ISP
i.e
‘229.122.79.32’
User Name
ISP login user name, given by ISP. It is
set for the encapsulation type of PPPoE
or PPPoA
Max. 18
characters
K
Password
ISP login password, given by ISP. It is
set for the encapsulation type of PPPoE
or PPPoA
Max. 18
characters
L
IP Sharing
IP Sharing or NAT (Network Access
Translation). Press ‘Space Bar’ to
select the settings.
Disable / Enable
Default: Disable
