G.SHDSL Router - AH507
Version 1.0
9
3.1 Console Setup
Step 1: Connect computer to the device through the console port as shown in Front
Panel.
Step 2: Open the terminal emulator software (like Hyper-Terminal on Microsoft Windows
machine, or “ Minicom” on Linux machine), then select the proper COM port for the
connection. Set the terminal and port to the following parameters:
- Terminal Mode: VT-100
- Baud rate
: 115200 bps
- Data bits
: 8
- Parity
: None
- Stop bits
: 1
- Flow Control : None
Turning on the AH507, then after few seconds of machine initialization, the system
management terminal will display the login screen. Details see section 3.3.1.
Figure 2: Console Setup
Emulator Terminal
VT-100
DSLAM / ISP
AH507
Corporation LAN
Internet
3.
Configuring
