27
28
Filter Replacement
F
il
te
r
R
e
p
la
c
e
m
e
n
t
F
il
te
r
R
e
p
la
c
e
m
e
n
t
Setting filter reset mode
Please call our branch office to arrange for the filter replacement when filter change icon flashes.
Delay in filter replacement can cause the product to function improperly.
Filter Replacement
1
5
1
2
1
Unplug the power cord or turn power off to ensure safety.
Shut off the main valve on the water pipe or be certain that the faucet is off.
To initialize, push ① the Reset switch inside the door two times.
1st
- voice message : "1st filter."
LCD : The indication (%) of current filter usage.
2nd
- voice message :
"Initializing was performed."
LCD : The indication (00%) of the initialization of filter amount.
3
-1
3
-2
4
Close the door of the device.
When opening the door, be careful not to get scratched from the sharp portions of the product.
Open the front door of the device.
When opening the door, be careful not to get scratched from the sharp portions of the product.
5
Plug in the power cord and turn power switch on.
How to replace a fuse
① Unplug the power cord.
② Turn the fuse case cap at the lower back of the product counterclockwise, and remove it.
③ Pull out a blown fuse, and insert a new fuse.
④ Turn the fuse case cap clockwise, and combine it.
⑤ Plug in.
Make sure to request a/s, and have an a/s engineer replace a fuse .
We don't assume no responsibility for any failures or disadvantages caused by the use of unauthorized parts.
2
4
Separation
Separation
Connection
Connection
3
Pull the filter towards you and then turn counter clockwise.
Install new filter by turning it clockwise.
Open
Close
1ST FILTER RESET
2
To initialize, push ② the Reset switch inside the door two times.
1st
- voice message : "2nd filter."
LCD : The indication (%) of current filter usage.
2nd
- voice message :
"Initializing was performed."
LCD : The indication (00%) of the initialization of filter amount.
2ND FILTER RESET
FILTER_RESET
Filter_1 Filter_2
