Elite ProAV Presenter Pro DarkUST 2 Series, User Manual, Page: 8 / 10

Rev.11042021-JA www.eliteproav.com 8
7. Roll the material by the ends only (black masking border).
8. Once the material has been completely rolled, insert the rolled material with the outer tube lying
horizontally. DO NOT force it in as that will crush the ends and damage the material. If the material does
not fit in snuggly, re-roll the material.
9. After the material is completely inside the outer tube, put the end caps back on to secure the material.
Folding Frame
10. Unlatch the hinged support bars in each leg and carefully lean it
forwards to lay it flat. Remove the legs by loosening all the knob
screws.
11. Then, unlatch all for hinged support on all corners.
12. Press in the locking buttons, near the folding joints, and slowly
gather the sides of the folding frame.
13. Again, press in the locking buttons. Then, pick up one end of the folding frame, and walk it to the
other end, folding the longer sections in half.
14. Carefully place the screen and components in the provided
carrying bag (f) .
CAUTION: DO NOT ROLL THE MATERIAL FROM THE
MIDDLE AREA TO AVOID BENDING AND CRINKLING