Elite ProAV Presenter Pro DarkUST 2 Series, User Manual, Page: 4 / 10

Rev.11042021-JA www.eliteproav.com 4
Unrolling the material
9. Carefully take out the screen material tube from the carrying bag and ONLY handle it HORIZONTALLY with
two hands to avoid dropping it.
ATTENTION: NEVER handle the screen material tube VERTICALLY or stand it to avoid crushing the material.
10. Once the screen material tube is on a flat surface horizontally, remove both end caps and gently pull out the screen
material out of the tube.
10. Unroll the material, remove the protective foam sheet, and set it aside.
11. Roll the material again to prepare for attaching it to the frame and note where
TOP and BOTTOM labels are.
12. Gently pick up the rolled material with both hands assuring the TOP label is
upwards and attach to the frame as shown in the following steps.
CAUTION!
THE PROJECTION FABRIC IS A DELICATE LENTICULAR SCREEN MATERIAL AND SHOULD NOT BE
FOLDED, BENT, OR CREASED. ALWAYS MAINTAIN THE SCREEN MATERIAL FLAT AND TAUT
DURING SETUP AND DISASSEMBLY. ANY DAMAGES TO THE SCREEN MATERIAL WILL VOID YOUR
WARRANTY.
TOP label should be Up