08202020JA
2
Product Description
Design
: The aluminum frame is designed to be light weight and easy to handle when setting up or taking it down.
Portability makes the screen easy to carry.
Screen Fabric
: The screen fabric is attached to the rectangular frame and held in place by Velcro and several press
stubs, which ensure an evenly stretched and flat surface. The
DarkUST® 2
(front projection) screen material is
delicate and should be carefully rolled to avoid any damage to the surface.
Hardware and Parts List
A. Folding frame x1
B. Left and right folding
legs x2
C. Screen material bag x1
D. Projection screen material x1
E. Protective foam sheet x 1
F. Carrying Bag x1
G. Knob screw x6
H. Pair of gloves x 1
Note: The parts list above is subject to change without notice.
Frame Assembly
1.
Take the
folding frame (A)
out of
the
carrying bag (H)
and place it on
a flat surface. Unfold the longer
sections first as shown in Fig.3-4
.
2.
Unfold the frame until the latch
on the hinge "clicks" into place.
Repeat the procedure for the
shorter sections. (Fig. 5-6)
3. Make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not bending (Fig.
7-8). After unfolding the frame, make sure to lay it out with the Velcro facing up (Fig. 9).
Fig. 8
Fig. 7
Fig. 9
Fig. 6
Fig. 5
Fig. 3
Fig. 4