Elite Greenhouses STREAMLINE Series, Instructions & Illustations

Page: 6 / 32

6
INSTALLATION INSTRUCTIONS FOR THE 5’3” WIDE MODEL
“STREAMLINE RANGE”
The contents of this carton are divided into the different frame assemblies that collectively
make up the completed greenhouse framework.
It is recommended that each framework assembly is fully completed before moving onto the next.
The contents are as follows:
1. Two side frames
2. Rear end frame
3. Door end frame
4. Roof vent
5. Doors
6. Bag of fittings containing:

Nuts and bolts general assembly

Overlap clips for glass

Spring clips for glass

Casement stay

Casement stay nuts and bolts

Four eave plates (not in the main bag, but taped up with the casement stay)

Two ridge plates

Four door wheels

Four door guides

Small self tapping screws

Double door catch

Two connecting plates

Two flat bar small door track supports
7. Roof bars
8. Coil(s) of glazing beading
9. One length of ridge
10. Two black brush draught excluders
For clear identification of parts and the number required please carefully refer to he earli-
er pages of component drawings and parts list.