23
ELITE PURSUIT AIR BIKE ASSEMBLY MANUAL
Ensure the pedals are securely attached to the crank arms. When tightening pay attention to
the reverse thread (tightening anti-clockwise) on the left hand pedal assembly, when sitting on the
bike. Be careful not to strip or force the pedal thread when tightening.
Before cleaning or carrying out any maintenance on your Air Bike, ensure the power is turned off
and the power cord removed from the plug socket.
Prolong the life of your Air Bike by performing periodic maintenance checks. Not only does this
ensure your machine is in full working order to ensure they continue to run smoothly and reliably,
but it will save you service costs in the long run.
Cleaning
General cleaning of the unit after use will protect the bike’s powder-coated framework
and prevent unnecessary corrosion stains and damage to the structural components from sweat
and perspiration.
Please ensure all sweat residue is wiped from any contact points or framework with a damp
cloth using a suitable PH neutral detergent in water to avoid salt and corrosion deposits on your
equipment. Failure or neglect to maintain and clean sweat residue from the bike frame may affect
any frame warranty implied.
Frame and Pedals
Check all nuts and bolts securing the framework, seat and handlebar assemblies are tight.
Ensure the pedals are securely attached to the crank arms. When tightening pay attention
to the reverse thread (tightening anti-clockwise) on the left hand pedal assembly, when sitting on
the bike. Be careful not to strip or force the pedal thread when tightening.
Battery Operated Consoles
If the machine is put in storage or not intended to be used for any period longer than 4 weeks,
please remove the batteries from the console to avoid any corroding and potential damage
to the console.
CARE AND MAINTENANCE
IMPORTANT INFORMATION
