13
ELITE PURSUIT AIR BIKE ASSEMBLY MANUAL
OPERATION INSTRUCTION
1. When POWER ON, LCD will full display 2s (Figure 1) with a long beep sound, then display wheel
diameter 1s in DISTANCE area (Figure 2). Then enter into AGE setting mode, the AGE flashing to be
set (Figure 3). Press the UP/ DOWN to set age and press ENTER to confirm then proceed to
Standby mode.
2. The window of INTERVAL 10/20, INTERVAL 10/20, INTERVAL CUSTOM, READY, WORK, REST,
TIME, DISTANCE, CALORIES, WATTS, SPEEED, RPM and HEART RATE will flash in sequence every 1s
(Figure 4 - Figure 16). If no input of key operation or RPM signal or pulse input for 60s, computer
will go to Sleeping mode.
Figure7
Figure1
Figure 2
Figure 3
Figure4
Figure5
Figure 6
